OpenPilot OPLink Mini-Modem Bundle
All the things you need, right? If the answer is yes then this is the bundle for you. Included in this bundle:
- 2x Genuine OPLink Mini-Modem (pair)
- MMCX Whip Antenna
- MMCX to SMA Adapter
- Genuine Nagoya Antenna
- 2x Genuine OpenPilot Serial Cable (pair)
- USB to MicroB USB Cable
OPLink Mini Modem
This genuine OPLink Mini kit contains the tiny 100mw 32bit modem and comes complete with a 2Bi antenna, OP Serial cable and a high quality MMCX to SMA pigtail. The modem uses a MMCX connector on board and this extends its flexibility greatly; you can use the included adapter which allows the direct connection of any standard SMA antenna without any fuss. This enables upgrades to very high performance off the shelf antennas which are generally SMA at this frequency range. Additionally, for on aircraft solutions a MMCX to SMA pigtail can be used for remote placement, and yet another option for a lightweight on-board solution is to use the Revo antenna which connects directly to the OPLink Mini.
Air-side wire antenna for 433Mhz with an MMCX connector.
Length: 7.5″ (14″ including the whip)
MMCX to SMA
SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead.
Length: 6″ (6.7″ including the MMCX and SMA connectors)
These are factory direct original Nagoya antenna. An NA-701 SMA-M 144/430Mhz Dual Band Flexible Whip High Gain Antenna to be specific. 100% new, factory packed and never been used.
OP Serial Cable
Serial cable to connect different OpenPilot peripherals. All serial ports within the OpenPilot project use the same pinout and the same connector, which this cable mates with perfectly.
The OpenPilot serial cable (4-pin JST-SH) plugs into the 4-pin ports (FlexiPort / Mainport / Sensor / etc) of OP boards and allows the user to connect telemetry modems, GPS devices, Bluetooth etc.
USB OTG to Micro B
USB 2.0/OTG Type Micro Male to USB 2.0 Type MiniB Male. Also known as a Hostmode Cable.
Length: 10.25″ (12.7″ including the USB connectors)
|Dimensions||153 x 153 x 153 mm|